Lufkin Thinline Diameter Tape
|
A real time saver for establishing plot radius and prism inventories! •
The pocket size DME 201 allows you to walk 360 degrees around the
transponder and receive accurate measurements even in heavy brush and
will not miss border line trees. • The DME can measure distance in English or metric units or measures up to 60' in feet/10ths with an accuracy of +/- 1%. • Offers reverse prism factors of 5, 10, 15, 20, 25, 30, 35, 40, 45 and 50 BAF. • Will measure a 52.7' plot radius for a 1/5th acre plot and it easily calibrated. •
DME 201 Package includes measuring unit, 360 degree transponder, plot
center staff, threaded tripod adapter for mounting transponder to the
staff.
|
|
|
6 different counters in one pocket sized device maintains thousands of registrations in each counter mode. • Numerically counts to 9,999 and alphanumerically to 35,000. 9 volt battery included.
|
|
|
Combining laser and ultra-sound for accurate distance, height and angle measurements in clear sights or heavy underbrush. The
Vertex Laser is a precision instrument designed for forestry. A
reliable rangefinder with the laser or ultrasonic feature or combined
with the tilt sensor for measuring angles and heights. In thick brush
you can use the ultrasonic mode and the transponder for even more
accurate distance measurements. It provides results in feet or meters
even when the target is not available to line of sight. The VL400
includes a reverse prism function with built-in prism factors of 10, 20,
and 40 (or metric). Laser feature allows for measurements at greater
distances in yards and meters. Offers 8x magnification for precise
aiming. • Laser: rangefinder with non-refective target max. distance 400 yds. • With reflective target: 150-999 yds. • Accuracy: +/- .25 yds. • Ultrasound: distance 100' or better with accuracy 1% when calibrated. • Height: range 0 - 999 ft. • Angle: range -55 degrees to 85 degrees.
|
|
|
Improved firmware, better display, audible sound signal and Bluetooth! The
Vertex IV is small and lightweight and will fit easily into your
cruiser vest pocket. With dependable accuracy it will take up to 6
heights on a single tree in English or metric units with no set distance
from the tree -- even through thick underbrush. Place the transponder
on a tree to be measured. Aim the hypsometer through the crosshairs at
the transponder. The Vertex IV will display 3 numbers;distance, angle,
and horizontal distance to the transponder. And it includes a reverse
prism function (BAF) with built in prism factors of 5,10, 15, 20 and 40.
(or metric). The Vertex IV can be easily
calibrated daily for the utmost accuracy and is Bluetooth capable for
transferring measured information. Available with a 60 degree (measures
only from the front) or a versatile 360 degree transponder that allows
you to walk all the way around the transponder and receive accurate
distance measurements for determining plot radius with one push of a
button. The Vertex IV is built tough with a reinforced alphanumerical
display, aluminum housing and completely sealed electronics. The 60
degree package includes the hypsometer and transponder. The 360 degree
package includes the hypsometer, transponder, plot center staff and
threaded tripod adapter. For a complete detailed brochure call toll-free (877) 736-5995
|
|
Lufkin Thinline Diameter Tape
|
Lufkin Thinline METRIC Diameter Tape
|
|
Lufkin Executive Thinline Tape
|
|